• Activity Feed
  • About
David Stewart left a comment for Jim
"Go to www.dodregional.org I think that brings you to northeast regional web page."
Nov 7, 2009
David Stewart left a comment for Jim
"Jim,

The grunt work is in making phone calls to prospects. It is the fast and cheap way to get quoting. Find out where DoD regional council is meeting in your area and go to that and similar events.

Dave



Dave"
Oct 16, 2009
David Stewart left a comment for Victoria Barile
"Will do...Tomorrow morning"
Aug 18, 2009
David Stewart left a comment for Victoria Barile
"Yes, but the drawing is confidential...I may need an NDA. Can you work with a faxed drawing."
Aug 18, 2009
David Stewart left a comment for Victoria Barile
"We normally run mock up parts of with cheaper left over material. It would be a costly luxury to have your equipment. I would be interested to know if your system could be used to build a pattern to hold a part for machining? Currently we are faced…"
Aug 18, 2009
David Stewart left a comment for Victoria Barile
"If we could add that service for our customers that would be terrific. Problem is I don't know who needs it? Let me go to your site and read up on this.

Dave"
Aug 17, 2009
David Stewart left a comment for Victoria Barile
"I'm more likely to sub work to someone up here that has the equipment.

Dave"
Aug 17, 2009
David Stewart left a comment for Victoria Barile
"Never done models or mock ups. Are work along those lines are functioning prototypes."
Aug 17, 2009
David Stewart left a comment for Brian Halicki
"Brian,

Should you need mechanical component help out this way...also check out this powerful conversion calculator: http://joshmadison.com/software/convert-for-windows/

Inspection Services- Zeiss UPMC 550, Guaranteed to 2um.
5 Axis Milling…"
Aug 13, 2009
David Stewart left a comment for Victoria Barile
"What kinda' horseless buggie are you putin' out there? I hope it means we don't have to machine prototypes in the near future.

Dave"
Aug 13, 2009
David Stewart left a comment for Kimi Ceridon
"Hi Kimi,

I'm not sure where green is taking me...I work for a fuel cell company as a vendor. Are you in the nuts and bolts end of things?"
Aug 13, 2009
David Stewart left a comment for Ashish S
"Hi Ashish,

I Okay here business is getting slowly better. Good luck to you.

Dave"
Aug 13, 2009
More…

Comment Wall

You need to be a member of EngineeringExchange to add comments!

Join EngineeringExchange

Comments are closed.

Comments

  • Jim November 6, 2009 at 3:49pm
    Thanks Dave for the encouragement, In this economy it seem no one is looking for new vendors. I'm finding some work, but nothing to get excited about. How do you find out where the DoD are meeting, I am registered with CRC but I have not had much luck finding machine work. I will keep plugging away.

    Jim
  • Victoria Barile August 18, 2009 at 2:19pm
    I would need to put it into Catalyst, the printer driver. We can sign an NDA. Let's "talk" offline. My email is vbarile@cimquest-inc.com or you can give me a call at 732-699-0400 ext. 219 if you have sometime. I have an NDA that I can email you that we have used in the past.
  • Victoria Barile August 18, 2009 at 2:10pm
    All depends on the tolerance you need to hold. And the weight of the stock that you will machine. And the method of workholding. Do you have a sample 3D CAD file? I can take a look and see if it's a good fit.
  • Victoria Barile August 17, 2009 at 2:46pm
    I peeked at your websites. Your parts are perfect examples of what can be "printed" using this technology. The process is called FDM and produces durable ABS plastic parts. We can do other materials including PC's and Ultem. I have customers, like you, that use this technology to print parts for their customers during the quoting phase, they also print parts to communicate throughout the shop floor to make sure that they are machining the right parts/features. The use for it is unlimited. Take a look at our site at your leisure... I am here if you have any questions.
  • Victoria Barile August 17, 2009 at 2:18pm
    That's great! We can print parts for you to. You can find out about the machines that we have here: http://www.cimquest-inc.com/3DParts. We can print various sizes, colors and materials. You can send your 3D CAD file anytime to us for a quote, (those are free) :) prototypes@cimquest-inc.com.
  • Victoria Barile August 17, 2009 at 12:22pm
    Yes, you can do functional parts. there's a video on our site, www.uprintsource.com. the wrench is very interesting.
  • Victoria Barile August 17, 2009 at 9:39am
    Mfg. Co's are bringing this in-house to get quick & cheaper parts "printed" before send thier parts to the machines. Saves time and money. Is this something that would help you?
  • Ashish S August 13, 2009 at 12:19am
    Hello Mr. David,

    How are you doing ?

    Ashish S
This reply was deleted.

Friends (3)

Photos