Comments

• 

  Scott Malcolm November 7, 2012 at 7:46am

  Hi. Thanks for adding me as a friend. Look forward to sharing.
• 

  Barry W. Moore April 7, 2012 at 4:38pm

  Mashall, I can't find a way to delete a mis-oriented photo from this site?

   
• WIieczorek October 5, 2011 at 2:23am

  Hi Marshall, This is Tomasz from Ammono. Thank you for your feedback in reply to my request for inserting the new product release. Please advice the place where it has been published.

  Regards. Tomasz
• Robert J. Kushner June 30, 2011 at 1:45pm

  Marshall:

     I'm using CMS IntelliCAD 6.6, an AutoCAD knockoff. I thought your group was made up of all ICAD users. If you know of any in the group that might address my issue, I'd appreciate your getting us together. Thanks.

  Bob

   
• Robert J. Kushner June 30, 2011 at 1:15pm

  Marshall:

     I'm somewhat new to the program; I was an AutoCAD user previously. I can no longer set the direction for a 2D line (or stretch an existing line) by dragging the cursor in the desired direction after picking a starting point and specifying a length (or distance). All such lines (stretches) are automatically drawn vertically, in the 90 deg direction. I was previously able to draw a designated-length line in any direction using ICAD, but I don't what happened. Is there a setting to change? The move and copy commands still allow me to specify a distance and drag to a direction.

     Thanks. Any help you can offer will be greatly appreciated.

  Bob Kushner
• Trang Ng March 29, 2011 at 8:39pm

  Thank you for creating this site. I was just wondering if there is an actual physical address and a telephone number.

   
• 

  Jbj Techniques January 19, 2011 at 2:52am

  Good morning from a cold and frosty Britain and thank you for the contact. We are very new to any type of on-line networking so it is always good to 'meet' people.
• 

  Benjilali MAhdi January 13, 2011 at 2:37am

  Hello Marshall, how do you do

  I have seen some videos about it is very cool and practical and it can be a money maker

  In Algeria SolidWworks is now widely known, CNC machines also but we use old method to produce 3D prototype

  3D printer it is not known in my country and I guess it is not yet used
• 

  Bill Redd November 20, 2010 at 11:23am

  Thanks Marshall,
  I've been getting "lovey notes" from Joy and Jane as well.
  Bill Redd
• 

  Bill Redd November 18, 2010 at 12:05pm

  I missed the Do Not Reply on your email
  Thanks Marshall, I joined the foray with my own opinion, you'll get a kick
  out of my Inverse law of Engineering Preparation... I'm no spring chicken,
  and the wagon I fell off of was a Massey Harris.
  Bill Redd